dreamr
Explorer Addict
- Joined
- October 5, 2003
- Messages
- 3,636
- Reaction score
- 13
- City, State
- Lynnwood WA
- Year, Model & Trim Level
- 99 XL / 4x4 / 4.0 ohv
So yes I need to clear some stuff out and wanted to see if anyone here was looking to buy some goodies before I craig's list it all for more than it is worth to me.
What do I have - well stuff - anything you have seen me buy or take off my vehicles over the years is still in the garage. I think I am mostly done with my truck for now - I don;t want to wheel it any harder than I have to in order to see what is at the end of the road. I have lost interest in wheeling as the primary recreational focus. Now if the road to something I want to see is a 4x4 road my truck has proven itself many times over. Some steel work on it as I feel the need and it is finished.... so I have some stuff it was going to get that it ain't now. The Mustang well I have a lot of remnants for it.
The big stuff first then some randomness - just ask if there is something else you need.
HP D-30 form a 96 XJ - I cleaned it all up, but it will need new hubs and 1 balljoint that I hurt a bit. I have breaks suspension, and well everything that attaches to the axle.
Ford 8.8 disc break rear end. Set up for a 4 link in a fox body. this is a 28 spline axle - tracloc - 3.55 gears. I have not touched it since I pulled it out of the doner - needs a bit of cleaning up and break lines.
Stock steel rims lol 15X7
I have the entire top end and some internals for a ford 5.0 roller engine - well and pretty much anything that was under the hood when I bought it
Explorer Parts - where to begin - I literally have boxes of random stuff from interior pieces to engine parts to suspension to ..... well ask and I will look
All in all not a very clear for sale thread but most of ya know what I have laying around from watchng the projects - post up with interest or questions and we'll work something out. I have been known to barter as well and I want some sliders or a fox mustang hood with at least 2" of cowl to clear this engine I have no problem prepping and painting a used one instead of a new one.
What do I have - well stuff - anything you have seen me buy or take off my vehicles over the years is still in the garage. I think I am mostly done with my truck for now - I don;t want to wheel it any harder than I have to in order to see what is at the end of the road. I have lost interest in wheeling as the primary recreational focus. Now if the road to something I want to see is a 4x4 road my truck has proven itself many times over. Some steel work on it as I feel the need and it is finished.... so I have some stuff it was going to get that it ain't now. The Mustang well I have a lot of remnants for it.
The big stuff first then some randomness - just ask if there is something else you need.
HP D-30 form a 96 XJ - I cleaned it all up, but it will need new hubs and 1 balljoint that I hurt a bit. I have breaks suspension, and well everything that attaches to the axle.
Ford 8.8 disc break rear end. Set up for a 4 link in a fox body. this is a 28 spline axle - tracloc - 3.55 gears. I have not touched it since I pulled it out of the doner - needs a bit of cleaning up and break lines.
Stock steel rims lol 15X7
I have the entire top end and some internals for a ford 5.0 roller engine - well and pretty much anything that was under the hood when I bought it
Explorer Parts - where to begin - I literally have boxes of random stuff from interior pieces to engine parts to suspension to ..... well ask and I will look
All in all not a very clear for sale thread but most of ya know what I have laying around from watchng the projects - post up with interest or questions and we'll work something out. I have been known to barter as well and I want some sliders or a fox mustang hood with at least 2" of cowl to clear this engine I have no problem prepping and painting a used one instead of a new one.