Driver Side Lock

[chrisoc1@aol.com]

I have a '01 Sport 4x4 and the driver side lock does not work. i took the door panel off and saw what seemed to be a motor wedged between the inner and outer metal. i was looking on for parts on line and i was going to get one of those motors but i dont know what it is called. If anyone knows what its called and the easiest way to change it that would be awsome.

 

[dking]

I don't know if this will help you but I found this pic on LMC here the link to the website. I can't post the pic. But if go to the website put the need info make, model and year then go to page 14 you should beable to see the pic i was trying to post. Hope this helps you.
[URL="http://www.lmctruck.com[/URL]

 

[chrisoc1@aol.com]

yeah man thanks alot that wedsite is pretty awsome. is the lock actuator what controls the locks movement?

 

[crunchie_frog]

If equipped, remove the power door lock actuator.
1. Disconnect the electrical connector.
2. Drill out the rivet.
3. Disconnect the actuator rod.
4. Remove the actuator.

 

[chrisoc1@aol.com]

thanks alot.. that was really helpful.. is there a sztep by step catalog on line or something?

 

[go77377]

But when you drill out the rivet, how do you reattach the actuator bracket?

 

[crunchie_frog]

You could try another rivet or nut and bolt.

 

[rickybobby]

Make sure all of the rods and linkages are attached first, we would hate to see you buy something you dont need