front bumper painted

[EXRob]

hydroxy, that looks REALLY good! I really love your X!

 

[eXplorerchic]

wow looks good! You painted this yourself right?

I'm wanting to paint my bumpers and trim, what kind of paint and all are ya using? Are you using a paint gun? Is there much prep work? Sorry for all the questions

 

[hydroxy]

yes I painted myself. Prep work was annoying because I had never done it before.. but it is actually pretty simple.

Sand w/ 220 till it is as smooth as you can make it and there is no shine left. Wipe down (i just used filtered water and a rag)
plastic primer (if it is on the tupperware).
sand w/ 400 (220 at places if you need it)
sand w/ 600. (wipe down again)
Paint 2-3 coats of paint... light coats (make sure it doesn't run).
then 3-4 coats of clearcoat. I dont know how to perfectly put this on yet so it is nice and smooth. Right now my front bumper is a little bit textured. I'll post about how to get it perfect when the rest of my paint arrives.

www.automotivetouchup.com

it sells paint in a spray can. I dont have a compressor or paint gun, so I was forced to go this route. Seems to work fine so far.

I have a big problem!!!!! I can't get the gap on the bumper to be anywhere near what it is on the stock explorer that I have pictured there. It seems it just wasn't made to go up that high (it physically can't go up anymore).

 

[Ak LTD Xplorer]

i tryed to get rid of my bumper gap today..mine will not move at all..but my gap's not bad so i don't care..

 

[eXplorerchic]

Thanks for the reply!

Where did you get your plastic primer? You think the dealership would sell the paint in the cans? Or is that site the place to go? I dont have any chrome to paint over just painted and clear coated trim.

 

[hydroxy]

home depot had the primer, says 'plastic primer' w/ a plastic chair on the can. It came in white, which is a plus. If you dont have a paint gun, I think you have to go w/ the website. I would avoid the dealer... they jack up prices so much it is insane. To paint your plastic trim, it shouldn't be that difficult. Remember to get the clearcoat as well.

 

[eXplorerchic]

alright, cool thanks for all the info...I'm going to tackle this myself see how it turns out. Bet its gonna take few cans to do my trim, step bars and bumper.
Can't wait to start it Thanks again

 

[X~FACTOR]

Originally posted by hydroxy
home depot had the primer, says 'plastic primer' w/ a plastic chair on the can. It came in white, which is a plus.

This?

Btw- can't you drill bigger holes to make your bumper go up some more?

 

[hydroxy]

Yes to primer, the stuff on the left was exactly what I used.

about the bumper, the holes are slotted on the bumper, I actually hadn't thought about trying to extend then, but it *might* work. I'll have to go give it a try today or tomorrow. Thanks for the idea.

 

[drmoore71]

Btw- can't you drill bigger holes to make your bumper go up some more?

that's what i did with mine after the 1" body lift. i just drilled the mounting tabs for the bumper on the frame about .5 to .75 inches higher (or as high as the tabs will allow), and then remounted my bumper.

 

[hydroxy]

thought I would show everyone my rear bumper... it doesn't show in the picture but it is really dirty from the sleet/roads.... I'm borrowing a nice digi cam tomorrow and I'll post some pics.

 

[hydroxy]

s

 

[hydroxy]

old way it was...

 

[hydroxy]

somehow I lost the plastic piece that covers the tow hitch... if anyone has one they could send me, I'd be much appreciative....

I also might need a pair of license plate bulb holders... my old ones are kinda broken. I had new ones, but they are whever the other plastic piece is that I lost... =(

 

[Ak LTD Xplorer]

i kinda liked the silver..make sure you NEVER try to stand on it now tho..you will really screw it up if you do

i want some of those chrome licn plate light's!!!(mine are that ugly black)

 

[hydroxy]

paint them =P

 

[Black Magic]

Mmmmmm.... Monotone is the ticket!