TeckNine4
Well-Known Member
- Joined
- January 22, 2006
- Messages
- 224
- Reaction score
- 0
- City, State
- Fort Myers,F.L./Fairfax,V.A
- Year, Model & Trim Level
- '94 Explorer XLT 4x4
My fuel gauge has never worked on my joint. I think its a common problem with these 1st years Expos. I just installed my new white indiglo gauges, and i was bummed that out of them all, the fuel needle stays on E and when I turn the truck off it jumps to 1/4 tank.
Does anyone know what I have to do? I beleive its just dropping the tank and pulling the whole pump and sending unit off and replacing it with one pulled from a low mile wreck or roll over from the pick and pull for only 30 bucks.
I was wondering if I had to do all of those things to get it working properly again.
I dont know how many times I ran out of gas, but luckliy every time its right near a gas station
Thankz a million for any help.
Does anyone know what I have to do? I beleive its just dropping the tank and pulling the whole pump and sending unit off and replacing it with one pulled from a low mile wreck or roll over from the pick and pull for only 30 bucks.
I was wondering if I had to do all of those things to get it working properly again.


