Having trouble with 4x4.

[slouis1647]

New at this site. I hope I am in the right place. I have a 2002 Ford Explorer XLT
And I installed a hub and bearing set about 6 months ago. We just had a bit of snow and I went to start the 4x4. It is a push button selection but no lights came on. I checked all wires and fuses and found nothing. Need help please.

Thank you.
Louis from Philadelphia

 

[BrooklynBay]

Welcome to this forum! I've moved your thread to the transmission section for more attention. You could check the sticky threads on the top of this section to start.

 

[gijoecam]

Welcome!

You'll find LOTS of people with the same issue. Your problem is likely unrelated to the hubs being replaced. The '02 model year is notorious for the 4wd control module failure. A quick search will turn up lots of '02's with the same issue. You may be able to find one in a salvage yard, and most dealers should have them available.

-Joe