ryancrf
New Member
- Joined
- October 14, 2010
- Messages
- 5
- Reaction score
- 0
- City, State
- Edmonton Alberta
- Year, Model & Trim Level
- 95 eddie bauer
I was wondering if it is possible to swap the Hydraulic Control Unit (ABS) from an 01 into a 95. I know the 01 has the ECM built into the HCU and the 95 ECM is some where I don't know, and how to remove it and rewire the 01 HCU / ECM combo into the 95. It might be wired right into the PCM.