HELP!!!Clutch system is getting air?

[_92_SPORT_]

OK so i have recently got a new clutch put into my 92 Explorer, when the clutch was first put in the system was bled and it ran fine no slipping or anything. But now that it has sat for three days. The clutch will not let go, i cannot shift into any gears. It seem that it is getting air in the system from somewhere. what should I be doing to fix this???? help please!!!

 

[mr cribb]

There is a bleeder valve above the hyd line.

You bleed it like you would bleed brakes.

Here's a link:

http://www.explorerforum.com/forums/showthread.php?t=214418&highlight=bleed+clutch&page=2 VIEW POST #34

The other poss answer is there's a failed seal from the clutch master allowing air to get in.

In the search function of this forum I typed "bleed clutch" there are multiple pages and lots of different answers.

 

[_92_SPORT_]

yes, but it has been bled then it sat for 3 days and the air seems to have made it way back in there...

 

[Rick]

Sounds like you may have to bench bleed the master cylinder.
http://www.explorerforum.com/forums/showthread.php?t=327079