Help Please

[Luis M.]

I have a 2000 Ford Explorer V6 and I'm having some problems. If this problem has already been posted I'm sorry but i couldn't find it.

Ok now to my small problem.

Shes got around 220k miles on her so she is a bit rough but lately she stalls after traveling on the interstate for about 35 mins, as soon as i hit a stop light some where in the city she stops and while I'm on the highway if i go over 65 she shakes not much but you can feel it. Also a few weeks ago i got her checked and they told that cylinder one was misfiring. But I moved the wires and the check engine light went off. Now I have this problem so if any help is out there please come soon.

P.S.
If any one knows were i can get the code for the keyless entry that would be a great help.

Thanks to all in advace

 

[Sams01XplrSprt]

welcome

 

[BrooklynBay]

Welcome to this forum! You should replace the spark plugs & cables. Do you have a check engine light with codes?

 

[StryctNy9e]

welcome to the forum, I would check plugs and wires as BrooklynBay suggested, I had a friend having similar issues and he said he changed his coil packs and it took care of the problem.

 

[1Aauto]

Welcome to the site

 

[Pensa]

P.S.
If any one knows were i can get the code for the keyless entry that would be a great help.

Thanks to all in advace

If you are looking for the door number keypad, that is located in the jack compartment of the truck. It is on the module at the front of the compartment and you may need a mirror to read it.