Hid headlights ??

[NickSantagataa]

Saw these on Amazon , the price is really good. What else do I need to buy with these to make them work without throwing me codes like no tomorrow?

http://www.amazon.com/gp/aw/d/B00ZB...headlights&dpPl=1&dpID=51zUP+zqj3L&ref=plSrch

 

[EXPLORER04]

A projector headlight housing or retrofit

 

[NickSantagataa]

So it won't work with these?

http://www.amazon.com/gp/aw/d/B005R...63_img_3?ie=UTF8&refRID=0PNADY5B5GAA1QDWX2NG#

 

[MotorCityFats13]

H10 is H10... it will work.... as for the canbus error I dont know...and you would have to try it and if it gives a code then no

 

[BrianDye]

You only need some load equalizers, aka resistors. I got the 50w 6ohm ones on eBay for like $5 shipped I think it came with 2 or 4.

You'll need one for each low beam, and one for each high beam (4 total).

You just use the quick splice to tap it into the wire feeding the headlight, and ground the other side.

 

[NickSantagataa]

I got led ones instead made by starnill they just plug in with the current headlight plug then runs from the resistor to the bulb