How do I fit 35's

[falls guy]

What is the least expensive way to lift my 91 X up enough to fit 35's. I figure if I put the axle under the leafs instead of above and maybe add a leaf that will probably do for the rear. How will I then match the height in the front other than coil spacers? How high WILL I need to go to fit these 35's?
Peace

 

[full foot notch]

sawzall?

mine fit 31s stock

cheap way would prolly be a 3 inch BL

but most likely i would go Spring over axle on the rear and a 4-6 lift in the front, or if your wanting to go big and bad like the rest of us, bypass shelling out the money for a lift for a stock TTB axle that will only take so much, and do a Solid axle swap to a D30,D44 or D60

 

[FireZapper]

Well I lifted my 93 6" and rub a little on bumpy turns with 34's I would think 6" and a 3" body to really clear 35's Unless you want to go 6" and then cut the fenders.

 

[CodePoet]

6" lift and trimming would be best in my opinion

The d35 will hold up to 35"s, but if you wheel it you will break ****...kinda a part of wheeling though haha. You can beef the outers up with d44 ttb outers though, you'll get bigger brakes (good for stoping with those bigger tires) and bearings so things will last longer...it's not quite bolt on but doable. Good luck

 

[95offroadx]

get a 4" lift kit and 3" body lift

 

[Doug]

Sawzall and grinder... got nuts.

 

[Nick_Good]

http://www.explorerforum.com/forums/showthread.php?t=67200