Hi
try the follow ->
open the car with the remote control and put the key into the lock, but don´t turn!
The next 8 steps must within in 30 sconds. Turn the key into the ignition position.
Press 3x the unlock switch to unlock
Turn back the igniton-key into the strip away position (but don´t strip away!)
press again 3x the unlock switch to unlock
Turn the key into the ignition position
now " chirps " the explorer short to report over that he feels well
Press 1x the unlock switch to unlock
Press 1x the unlock switch to lock
He "chirps" again
Turn the key to the strip away position (but don´t strip away!)
Now your Explorer will chirps again to tell you, he apprehended the code.
Last step, you must wait at least 1 minute (no joke)
I hope, this will help. It´s runing with my ´98 Explorer. This should be run with all
Explorer build 1997 to 2001 with automatic transmission and the most Explorer
build 1995 to 1997.
If you have to pinch off your batterie the adjustment will maybe lost, but you can repeat it again and again.
regards from germany
Holger