I need help with my 1999 Ranger.

[RodneyF]

Need help with 99 ranger. Was running fine. Turned it off one night would not start next morning. Starter, Battery & ignition switch tested fine. Am not getting voltage to solenoid terminal. Any ideas from here? Thanks.

 

[BrooklynBay]

Welcome to this forum! I've moved your thread into the Ranger section. Are you referring to the starter solenoid or the starter relay? Did you check the fuses?

 

[RodneyF]

99 ranger

Talking about power to starter solenoid at starter. The truck has a relay rather than solenoid. I checked the fuses under the hood and all checked ok. I am going to check the NSS today. Any suggestion on the NSS pin configuration to by-pass the switch?

 

[BrooklynBay]

Check the relay on the frame, and the wiring.

 

[RodneyF]

To Brooklyn Bay

Thanks. Any idea where it is on the frame? Can't seem to spot it. Only relay I find is in the fuse box.

 

[BrooklynBay]

Follow the wiring from the starter to the relay.