I need to get my '04's off the ground. | Ford Explorer Forums

  • Register Today It's free!

I need to get my '04's off the ground.

lbl24609

New Member
Joined
March 18, 2006
Messages
2
Reaction score
0
City, State
Cedar Bluff, VA
Year, Model & Trim Level
96,two97's and two 04's
I own a small surveying and engineering business. We once ran full size Bronco's but those days have gone. I've got two 96's and a 97 Explorer that we were able to add a 3" body lift and get 32 x 11.50's on. That seems to work fine. I've recently purchased two '04's and while I've been impressed with them, I'm scrubbing the ground when crossing water bars or in roads that have been rutted out. I've noticed from the site that a suspension lift seems to be out of the question, but I've also read that you can get a body lift. I haven't found one on any of the sites I've been to. Can someone help?
 






Welcome to the site. Not sure of the part number, but you can get a body lift (most likely another one for a Ranger) and put it on like you did with the 96-97s. It's probably been mentioned somewhere on here, but I'm not sure where. There was a dealership that had a bunch of the 02+ Explorers body lifted. Maybe there was info in that thread? Good luck
 






I found this one at www.suspensionconnection.com

It's for the Ranger, will it work on the Explorer?
Ford Body Lifts:
Ford 2001-05 Ranger or Splash 2wd & 4wd - 3" body lift kit

View Larger Image

Our Price: $215.83

SKU: 70033

Shipping Weight: 35.00 pounds
Quantity:

Average Delivery Time: 4 to 8 business days
Options:
Shift Extension - Vehicle has automatic transmission -Manual trans requires shift ext. #3700 (Mazda trans only) (add $28.95)

Description:
Performance Accessories has more than 20 years experience in the off-road industry. Specializing in body lifts to fit most trucks & SUV's. Body lifts are designed to lift a Ford Ranger by placing 2" or 3" blocks between the body & frame. Performance accessories lift block's are constructed of a high grade reinforced nylon block, and the hardware is all grade 5 zinc plated for maximum strength and corrosion protection. Body lift kits are complete with all the nessesary hardware and brackets to lift your Ford Ranger. Performance Accessories has the most complete Ford Ranger body lift kits, with the best quality and service available.
High grade nylon body lift blocks
Plated brackets resist corrosion and rust
Includes all hardware for bolt-on installation
Available for most 2wd & 4wd Trucks & SUV's
Replacement shocks are not required with body lifts
Fits following years:
01, 02, 03, 04, 05
2001, 2002, 2003, 2004, 2005

Fits following models:
Ranger, Splash

View all "Body Lifts"

View all "Suspension Lift Kits"


Notes:
1. Some suspension lift kit manufactures do not recommend the addition of any body lift kit. If you have or are planning to install a suspension lift and a body lift kit please refer to the suspension lift kit manufacture or contact us for more information.
2. Note: Image shown is a representation of this part. Actual part may vary.



Ford Ranger Body Lift Kit Tech Notes:
5. It may be necessary to drill the front two body bushing sleeves out to 1/2" for new bolt clearance.
6. Front and rear bumper brackets are included in this kit.
7. Modification to the front frame horns will be required to raise the front bumper using the bumper brackets included.
15. Steering extension included.
20. Manual transmission models will require part 3700 shift extension (Mazda transmission only)
21. Rear bumper brackets are to enhance appearance only, bumper cannot be used for towing
 






Back
Top