Installed new clutch/slave tranny locked in Reverse ???

[akbossman]

It all went great, thanks to this site and this thread http://www.explorerforum.com/forums/showthread.php?t=242091#post2237104

so I upgraded to Elite The only problem is I can't get the tranny to shift so I re-bleed the master cyc (removing it from the firewall etc) and still not able to shift. After I started my 91 Navajo electric shift 4x4 , I discovered the rear wheels are turning in reverse. The clutch works but the tranny is stuck in reverse.

I had removed the inner shifter boot when I first removed the tranny so I must have bumped something to make it stay in reverse. The shifter is straight up and goes into the tranny just fine and it moves a little side to side. I tried installing it by tilting the shifter at the angle that reverse would be but it did not work


HELP

I really did search but now I found this
http://www.explorerforum.com/forums/showthread.php?t=146636&highlight=manual+transmission
hope it works I will post soon so it can be moved or ??

 

[akbossman]

Better

very simple fix with that link. I now have 500 miles on the new clutch & slave. The vibration that I had right before the fix is back. It only does it when accelerating. so I am thinking rebleed the clutch(?) maybe the master cylinder any other ideas?