installing clear corners?

[jarededge]

i know i have to unscrew them on the top, but is this it? i just don't want to break anything by pulling too hard. by the way, it's for a 98 eddie bauer.

 

[BeauJ]

Yes, they just pull out. Once unscrewed, just grab both side and wiggle will pulling. It might be tough at first, but they will come out.

 

[jarededge]

cool, thanks

 

[Laddy]

so you don't have to take the grill off?

 

[boominXplorer]

nope

 

[quiksilverdh]

just be sure when installing the new corners, that you snap it into place correctly... (there are 2 or 3 studs the need to be kinda "banged" into place)... at least thats what I had to do to put mine in...

 

[Tonedeaf]

also be sure to keep an eye on the metal clips over the screw holes because the have tendency to come off when sliding the lens out. you need them because those are what actually has the threads for the screws not the hole. one of my came off when i was replacing mine so now i just have one screw holding it in place.


BTW does anyone know where i can get =a coupld of those from?

 

[DannyDynamite]

BTW does anyone know where i can get =a coupld of those from?

Homedepot?

 

[BuffaloXplorer]

Don't forget the clear silicone sealant around the edges of the housing - where it meets the reflector.