Icuff4cash
Elite Explorer
- Joined
- February 22, 2016
- Messages
- 592
- Reaction score
- 24
- City, State
- Las vegas
- Year, Model & Trim Level
- 1994 aerostar awd
my transfer case has been leaking since I bought it. On real hot days I guess the capillary action makes it drip more. Well the thought was the drain cap leaking. I didn't find that to be leaking I found oil pooling on the nut I drained the case what a mess my drain pad as off and I dropped about a pint on my driveway. After looking at everything I had a big patch of white silicone on the bottom of the front nose cone. Well the silicone peeled like soft peanut butter. Under the patch is a plug of metal epoxy the size of a dime.and around the plug oil is leaking out of the transfer case. Now my codes. My rear main is weaping and a trans seal. I know the book says sencers. But all my contacts are oil soaked including the harness loom. Will oil short out my electrical circuit. The wire loom comming out of the floor that plugs into the harness that go to the connectors to the case are soaked. The 2 wires going to the transfer case are also soaked in oil. How do I dry oil soaked electrical harness .
Do I cover the leaky patch with jb weld or resilicone it
Do I cover the leaky patch with jb weld or resilicone it