Lift kit information.

[ExploderAndrew]

i just bought a 99 explorer sport needed a tranny and i put a new on in
i would like it lift it to the point where i can put 33's on it and i would like to know if anyone can help me out on where to find a lift or how to mod. it

thank you

 

[BrooklynBay]

Welcome to this forum! I've renamed your thread, and moved it into the shocks, suspensions, and lift kits section.

 

[brickwall]

i put a set of sport trac springs in my sport and turned the torsion bars up and got enough to clear 32s with the grey flares still on, got roughly 2"s in the front and 2 1/2" - 3" in the rear which also got rid of the rear end sag

 

[corkey]

takes more than a torsion twist and shackles to run 33's unless you want to cut up your rig a bunch,,
usually a 3 inch body lift and a bit of cutting will put 33's under,
to make it so you do not have to cut anything , a 4 inch Superlift kit is required at least, and than it depends on the rig,
i ran a 285 75 16 tire that is close to 33 on my rig with no cutting
but it was close,,

 

[ExploderAndrew]

okay thanks alot and what superlift would i put on it?

 

[corkey]

There is only 1 kit for an Explorer,

http://www.superlift.com/Catalog.asp?P=K494

 

[ExploderAndrew]

would u happen to know how much that is? i keep calling and i never get a response