MAC CAI for OHV

[Reevet50]

Done quite a bit of research on this, but have come up empty handed. I'm seriously considering removing my stock air box for a MAC induction kit in my '96 OHV. The only thing that concerns me is that while the CAI kit is able to house the MAF and IAT sensors there's no grommet to fit the crankcase return vent tube. Do I just abandon it, or am I missing something here? Any help would be appreciated.

 

[jremington59]

Is this the one you are looking at?

http://www.macperformance.com/store/PDF/3640 Instructions.pdf

 

[Reevet50]

Yes, that's the one. The rubber grommet shown to the left of the MAF is where the return tube would be on my stock set-up, but instructions say that's where the IAT goes...

 

[jremington59]

There's a number at the bottom that you can call to ask them about it.

 

[Reevet50]

Haha, I've read about MAC customer service nightmares, but I'll give it a go.

 

[Reevet50]

Okay, just got off the phone with a MAC technician (Of course no one answered the toll free number so I had to call the local number from NJ to CA) and he said all the provisions are on their system to house the MAF, IAT, and the crankcase return vent. Just an FYI for everyone.