Many Light ?'s

[yoohooman480]

First off what type of headlights should I replace my old stockers with? looking for somehtign not too expensive but with more light than normal.

Second. Anyone able to get strobe lights into the corner lenses that usually do not have any lights in them. If so what type of strobes.

Third of all. Anyone have any information on circuit breakers for cars. I want ot run 3 amps of flashing LED's for the fire dept + under body LED's and alternating headlight flashers and taillight flashers. Anyone know how to do that?

Few more ?'s but if you think you can help email me at yoohooman480@aol.com thank you in advance

 

[Charlie's_93EB]

sylvania silverstars are some of the best replacement bulbs i have heard of.

as for strobs in the little corner lenns, i have a set of wally world strobs but i am too lazy to put them in and now with the brush guards that is way to much work!!!!

good luck

 

[yoohooman480]

are u sure that the strobes would fit in the lenses. and are u talking about the ones under the headlights or the ones next to the headlights?

 

[Charlie's_93EB]

yes the side marker lens, the eye w/o any light all you have to do is take out the len and drill the right size hole iin the back of the lens

here are the strobes i was going to use but did not, they use a 12V you can see the lead wires on the right and the power goes to the box it is 2" by 1.5"
then to the srtobes them shelves about .5" by 2.25" long my strobe slow i blink per 2 seconds

 

[yoohooman480]

do they stick to the reflector or do they just hang there....how do they mount..and could u give me the name of the company you have there

 

[Charlie's_93EB]

do they stick to the reflector or do they just hang there....how do they mount..and could u give me the name of the company you have there

i did not pit them in so nether, but i probale drill the hole and let them lay on the bottom, they have sticky tape, i got them at wal mart, the lights are made by "City Lites"