zonk
New Member
- Joined
- January 28, 2003
- Messages
- 1
- Reaction score
- 0
- City, State
- Wallingford, CT
- Year, Model & Trim Level
- 98 XLT
I have the fram valve on now, it works but is REAL slow. Before that (and I think I'm going back to it), I made a flat 'funnel'. A piece ov gavanized sheet metal, about 12x18. I creased it in the center lengthwise, then put a hook on 1 end. I slide it up between the block and suspension, and hook it on the tranny lines. The oil follows the crease, right down into my drain pan. Works great!!!
