My quest for 30 MPG - Ford Explorer Gas Mileage Tips | Page 77 | Ford Explorer Forums

  • Register Today It's free!

My quest for 30 MPG - Ford Explorer Gas Mileage Tips




Join the Elite Explorers for $20 each year or try it out for $5 a month.

Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





what kit did you get?
how much is that setting you back?
 






























Although the concept isn't new, caution should always be taken. Use an ignition controlled fuse set up, and a cut off switch near the driver's side. An additional switch on the unit is a good idea too. This picture was from a time when hydrogen was known to have potential, but the cautions were not known as of yet:
hindenburg.jpg
 












Although the concept isn't new, caution should always be taken. Use an ignition controlled fuse set up, and a cut off switch near the driver's side. An additional switch on the unit is a good idea too. This picture was from a time when hydrogen was known to have potential, but the cautions were not known as of yet:
hindenburg.jpg

Do you have this done in your mini vans?
 












BrooklynBay I have sourced the material from both mcmaster.com and grainger.com Both have 316L stainless. I will be installing an HHO by next weekend

--Joe
 






Al who do you recommend for MPG explorer tunes for the X-cal2 these days?

--Joe
 












HHO generator arrived today.

Will install tomorrow after doing some rewire work on it.
 






Sweet, can't wait to hear the results. I have had neighbors asking me about HHO and I am excited to hear how it works out for you.
 






That's great to hear Aldive, can't wait to see your data and read your review on it.
 






Installed HHO generator today.

Here are some pictures of the generator.

A write up with more pictures of the install will be completed soon.
 

Attachments

  • 1.jpg
    1.jpg
    38.4 KB · Views: 469
  • 5.jpg
    5.jpg
    27.7 KB · Views: 473
  • 3.jpg
    3.jpg
    37 KB · Views: 467
  • 4.jpg
    4.jpg
    31.6 KB · Views: 464






You will get a stronger reaction if the plates would be closer together. Make sure that they don't accidentally touch. A non conductive bar on the bottom of both electrodes would be a good idea to install.
 






I been wondering about the HHo generators I just thought it would not make enuff HHo from the videos i seen. Have you ever thought about a very slow feeding propane injection system?
 



Join the Elite Explorers for $20 each year or try it out for $5 a month.

Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.











Featured Content

Back
Top