alakers
Well-Known Member
- Joined
- July 31, 2010
- Messages
- 130
- Reaction score
- 0
- City, State
- casper, wyo
- Year, Model & Trim Level
- '94 4WD
Awesome truck, but with that wheel tire setup its dangerous. Like mentioned above it may be a bit of a tippy stance. I once saw a writeup on here about 1.5" body lift done by cutting the body spacers in half with a bandsaw, and only using half of them. you could look into it, as it would cut the body lift down a bit, still fit some bigger better tires, and would be cheap as hell, you would have to buy some hardware... best place i can think of ..
Page=25http://http://www.lmctruck.com/icatalog/fex/full.aspx?Page=25
hope that worked, if not lmctruck.com
if you want to take the body lift off completely, you can buy new bushing and hardware very reasonably at lmc, and im not sure about having to change your steering column length, but i doubt that'd be an issue going down 1.5 inches.
down three you can, but its a fairly easy job.
Your suspension lift is pretty badass and i'd bet would be way more work and hassle, as well as money to replace
good luck with the new truck !!
Page=25http://http://www.lmctruck.com/icatalog/fex/full.aspx?Page=25
hope that worked, if not lmctruck.com
if you want to take the body lift off completely, you can buy new bushing and hardware very reasonably at lmc, and im not sure about having to change your steering column length, but i doubt that'd be an issue going down 1.5 inches.
down three you can, but its a fairly easy job.
Your suspension lift is pretty badass and i'd bet would be way more work and hassle, as well as money to replace
good luck with the new truck !!