Equnoxe
Well-Known Member
- Joined
- March 16, 2008
- Messages
- 444
- Reaction score
- 3
- City, State
- Ontario
- Year, Model & Trim Level
- 97' Exploder EB Edition
I have an American bass xd2000, BassWorx GPH210BK, and am looking at putting two Pioneer TS-W2502D2's with it.
the box is a dual 10", dual port with a volume of 2.4 and tuned to 40HZ
the amp has been running at .66OHM daily in my truck with no problems, I'm looking to take it to .5ohm with this setup. It'll have 2 optima's and a 2.5 farad cap feeding it.
subs are DVC 10's (dual 2 ohm magnets) wired parallel for .5ohm. Each sub is rated for 800RMS and 3000Peak.
look good or no? Its going into a Mazda 2 or I would keep the 6 tens
the box is a dual 10", dual port with a volume of 2.4 and tuned to 40HZ
the amp has been running at .66OHM daily in my truck with no problems, I'm looking to take it to .5ohm with this setup. It'll have 2 optima's and a 2.5 farad cap feeding it.
subs are DVC 10's (dual 2 ohm magnets) wired parallel for .5ohm. Each sub is rated for 800RMS and 3000Peak.
look good or no? Its going into a Mazda 2 or I would keep the 6 tens