JackDaniels1171
New Member
- Joined
- July 9, 2021
- Messages
- 2
- Reaction score
- 2
- City, State
- Fort Worth
- Year, Model & Trim Level
- 2018 Explorer Limited
I’m newly registered I came to know about this forum through Platinum Owner Forscan Spreadsheet link in the Forscan Forum.
I’ve enabled outside temperature display on my IPC type 2 display, as well as climate control from IPC right hand side. On APIM I’ve enabled heated and cooled seats displayed. (The information on how to do that is no longer available on Platinum Owner spreadsheet since June).
I’m considering updating my APIM to Sync 3.4 with 2020 maps using Cyan labs method. I’ve recently purchased my previously leased 2018 Limited and the only concern I have is loosing heated and cooled seats control on APIM as that was the only change I’ve made on APIM using forscan and the information on how to enable it on Sync 3.4 is not available.
I’ve enabled outside temperature display on my IPC type 2 display, as well as climate control from IPC right hand side. On APIM I’ve enabled heated and cooled seats displayed. (The information on how to do that is no longer available on Platinum Owner spreadsheet since June).
I’m considering updating my APIM to Sync 3.4 with 2020 maps using Cyan labs method. I’ve recently purchased my previously leased 2018 Limited and the only concern I have is loosing heated and cooled seats control on APIM as that was the only change I’ve made on APIM using forscan and the information on how to enable it on Sync 3.4 is not available.