No Low range

[Fossiljager]

Thanks to everyone for the help with install the 4.L and A4LD in my bronco II
With all the Explorer stuff on it, in and powering it, I can now call it an X Bronco....... sorry..

My electric transfer case is not dropping into low range.... Any ideas on what the problem might be before I tear into it?

Thanks,

Harl

 

[94Gexplorer]

you can take off the transfer case motor and manually select low from there to make sure it works

 

[Maniak]

The shift motors can stop shifting into gears when they get worn. There is a rebuild thread on here.. (I think its listed as shift motor rebuild)..

If you think there is a chance the transfer case itself might be bad, just shift it by hand. Once you get the shift motor off you can rotate the transfer case using a pair of pliers.

~Mark

 

[Fossiljager]

I can electrically shift into 4 wheel drive high, but no low range. Everything seams to work on cue except for the low range. I'll look for the rebuild post... .

To be honest now that I have the 4L and A4LD in and running, I just want to throw the drivers seat back in and take it on tour. Unfortunately I have allot to do before I can do that.

thanks for your help,

Harl