orbital mounting

[Four0Sport]

Other than a write up on TRS I am not seeing very many posts on mounting an orbital valve to a 91-94 for full hydraulic steering. I need some ideas on where/how others have mounted their orbital valves. Again, needs to be on a TTB gen rbv frame.

thanks!

 

[Micah J]

Would love to see what you find. I have very seriously been considering full hyrdo. What are you going to use for a pump?

 

[Four0Sport]

All psc... fabricated bracket holds psc pump, psc remote res, psc double ended ram

 

[yostyexplorer94]

Here is a diagram of a crown fork lift orbital mounting location

This is a crown reach truck orbital diagram

Not sure how helpful this is, but it gives you an idea how forklifts mount them.

 

[Four0Sport]

This is what we're looking at kids.

 

[Micah J]

Is the pump mount a pcs piece or 1 off?

 

[yostyexplorer94]

Do you think moving the power steering pump up would help? That would probably mess with your reservoir mounting though.

 

[Four0Sport]

Is the pump mount a pcs piece or 1 off?

1 off from a good buddy of mine

Do you think moving the power steering pump up would help? That would probably mess with your reservoir mounting though.

I don't want to change your mount because of just what you said... the pump would be too high. the reservoir is already going to be 2 inches outside of the hood when im done.

 

[Four0Sport]

found this on TRS, truly the only good thread I have found. I should be able to clear all the hoses with the ram on its side. I just never thought to myself to flip the mounting bracket around.