Orifice tube removal

[silverbullet99]

I found this tool and wondered if this would work:

http://www.partsamerica.com/ProductDetail.aspx?categorycode=3569&mfrcode=FAA&mfrpartnumber=59509

Also, where exactly is the tube located?

Thanks,

Jim

 

[shamaal]

See:
http://www.explorerforum.com/forums/showthread.php?t=160113
It's on the passenger side on the line that runs from the condensor to the bottom of the evaporator. I didn't see a tool in your link, but it can be removed with a pair of needle nose pliers. Make sure to use two wrenches and work carefully to avoid bending the tube. There is a greem o-ring that you can change while in there.