Power Window Regulator Jumping

[1993Saturn]

I had just taken my power regulator apart, cleaned, polished armature, brushes, oiled felt seal. regreased and installed 3 new replacement bushings. I cleaned, greased and aligned all the channels, guides and fuzzy strips for the window and mechanism. I bolted it all back together and the window works perfectly, running up and down like a monkey with his tail on fire.
It wasn't long before the power motor was jumping at the top and bottom of operation. I took the motor apart again. (I'm getting good at this, does anyone else want me to repair their motor? )
Anyway, the picture shows the buttons didn't want to stay round. They behave like they are jelly beans instead of bushings/buttons. Did I do too good a job and the buttons can't take the torque?
OH, CRACKERS I can't get the pic to work. Here is the link
https://picasaweb.google.com/fritzers06/20120922?authkey=Gv1sRgCLPZ9YrAmOOtbw#5849186487562625794

 

[Masterd]

Those bushings look bad, just like the ones I removed when my window motor seized. did you check the bolt torque when you installed it back into the door?

 

[1993Saturn]

What bolts are you referring to? Is it the motor case bolts you are referring to?
I was wondering about the quality of the plugs when I encountered the sticky by 85Dave: Power Window Bushing Replacement with Pics.
http://img.photobucket.com/albums/v229/85Dave/Power Window Bushing/gear-install2.jpg
The plugs in the photo are like a glue stick color. I guess O'Reilley's Auto Parts must have dug up some ancient stock left over from Schucks.