vicvic
Member
- Joined
- March 1, 2011
- Messages
- 14
- Reaction score
- 1
- City, State
- Riverview, MI
- Year, Model & Trim Level
- 04 XLT
Note: If the vehicle is equipped with memory seats: program the #1 Remote transmitter (Marked on the back of the remote transmitter) and #2 second etc.. etc..
Switch ignition from OFF to ON 8 times within 10 seconds:
Note: Do not start car
Doors should lock then unlock.
Within 7.5 sec:
Press any button on the first Remote transmitter.
Doors should lock then unlock.
Within 7.5 sec:
Press any button on the second Remote transmitter.
Doors should lock then unlock.
Within 7.5 sec:
Press any button on the third Remote transmitter.
Doors should lock then unlock.
Within 7.5 sec:
Press any button on the forth Remote transmitter.
Doors should lock then unlock.
Within 7.5 sec:
Note: If door locks do not operate: wait a few seconds and press button again
Switch Ignition OFF
Doors should lock then unlock.
Note: A maximum of 4 Transmitters can be programed
Switch ignition from OFF to ON 8 times within 10 seconds:
Note: Do not start car
Doors should lock then unlock.
Within 7.5 sec:
Press any button on the first Remote transmitter.
Doors should lock then unlock.
Within 7.5 sec:
Press any button on the second Remote transmitter.
Doors should lock then unlock.
Within 7.5 sec:
Press any button on the third Remote transmitter.
Doors should lock then unlock.
Within 7.5 sec:
Press any button on the forth Remote transmitter.
Doors should lock then unlock.
Within 7.5 sec:
Note: If door locks do not operate: wait a few seconds and press button again
Switch Ignition OFF
Doors should lock then unlock.
Note: A maximum of 4 Transmitters can be programed