daisyrocky
Well-Known Member
- Joined
- December 31, 2007
- Messages
- 333
- Reaction score
- 3
- Year, Model & Trim Level
- 1995 Ford Explorer
Hi, been on this project for two days. Transferrring the RAP module from a dead Explorer to a non keyless one. Everything is almost done except one wire from the GEM module pin 17 Dark Green/Purple (door disarm) is missing from both Explorer at the 26 pin connector. All other wires are OK. Do I have to have this wire connected? Been going color blind from all these wires. Thanks in advance!
