dco43054
Explorer Addict
- Joined
- April 24, 2003
- Messages
- 1,290
- Reaction score
- 16
- City, State
- cmh
- Year, Model & Trim Level
- 20 XLT
So, I've noticed a pronounced rattle from the right side, front, when driving over a bump or rough surface. It is nowhere near the A pillar. it is only when the right side of the vehicle goes over rough surfaces. It does not happen with the left side.
I first thought loose suspension component. Just jacked it up, and took a long look at all the mounting points, looked for obvious signs of loose componenets (scratches, bright scrapes, gaps, etc) and nothing.
So I looked at the upper end of the strut mount and nothing. Then I started wiggling stuff in the engine compartment in that area, and the first thing I laid my hands on, the radiator reservoir, is obviously loose. It has two bolts and a slip in mount in the one corner that hold it in place. The slip in mount is not tight at all and the reservoir will rattle against the body.
I guess it could be that easy, but I wouldn't think so. The sound I am getting is more like a suspension rattle, but the reservoir is hollow, so it could be the source. I am going to put a piece of inner tube behind it just to tighten the fit and eliminate it, or identify it, as the source of the rattle.
Anyone else had a similar rattle?
I first thought loose suspension component. Just jacked it up, and took a long look at all the mounting points, looked for obvious signs of loose componenets (scratches, bright scrapes, gaps, etc) and nothing.
So I looked at the upper end of the strut mount and nothing. Then I started wiggling stuff in the engine compartment in that area, and the first thing I laid my hands on, the radiator reservoir, is obviously loose. It has two bolts and a slip in mount in the one corner that hold it in place. The slip in mount is not tight at all and the reservoir will rattle against the body.
I guess it could be that easy, but I wouldn't think so. The sound I am getting is more like a suspension rattle, but the reservoir is hollow, so it could be the source. I am going to put a piece of inner tube behind it just to tighten the fit and eliminate it, or identify it, as the source of the rattle.
Anyone else had a similar rattle?