rdw59565
Member
- Joined
- August 1, 2011
- Messages
- 10
- Reaction score
- 0
- City, State
- North Logan, Utah
- Year, Model & Trim Level
- 1999 Eddie Bauer
These were not easy to find. Everywhere I went showed them in the computer but the part did not fit. Mine is a 99 Eddie Bauer 4WD and the sway bar is approximately 19mm diameter. The Ford dealer showed it in the exploded parts diagram, but it did not show a part number. This took some tracking down but the correct part number is F57Z-5493-BD. This will get you a bag with two bushings so only order one. BTW, Ford calls these "insulators" if you can believe it.
There is no split in the bushing so you have to drop the bar and slide the new ones on. It isn't as difficult as it sounds. Took me 30-40 minutes.
These are NOT the end links.
There is no split in the bushing so you have to drop the bar and slide the new ones on. It isn't as difficult as it sounds. Took me 30-40 minutes.
These are NOT the end links.
