Dustin U
New Member
- Joined
- November 21, 2010
- Messages
- 3
- Reaction score
- 0
- City, State
- Idaho
- Year, Model & Trim Level
- 92 XLT
Ok... Ive R&R this dang thing twice!!!
First time it wouldn't come out of 4 hi after i replaced the missing bump stop 'found all the little fragments" but it wouldnt go into 4 lo??
Pulled it again now it wont go into 4x4??
I had to pull the brown wire and the magnetic sensor blue and green wires from the housing? "male/female"
what is the purpose of the magnetic sensor ??
I could have the wires crossed? "blue and green" I've checked the computer both times.. The first time while i'd engage the 4 hi button i would receive a fast blinking from the LED and i could here the computer clicking rapidly... BUT it was still in 4 hi..
The second go around I have no LED and can hear the usual slow click from the computer? and it will not go into 4x4
I also disengaged the battery cable trying to reset the computer..
Thanks... Dustin
92 auto...
I just tested the 4x4 module no blinking lights! nothing... I think i've had multiple failures... : (
First time it wouldn't come out of 4 hi after i replaced the missing bump stop 'found all the little fragments" but it wouldnt go into 4 lo??
Pulled it again now it wont go into 4x4??
I had to pull the brown wire and the magnetic sensor blue and green wires from the housing? "male/female"
what is the purpose of the magnetic sensor ??
I could have the wires crossed? "blue and green" I've checked the computer both times.. The first time while i'd engage the 4 hi button i would receive a fast blinking from the LED and i could here the computer clicking rapidly... BUT it was still in 4 hi..
The second go around I have no LED and can hear the usual slow click from the computer? and it will not go into 4x4
I also disengaged the battery cable trying to reset the computer..
Thanks... Dustin
92 auto...
I just tested the 4x4 module no blinking lights! nothing... I think i've had multiple failures... : (