ExplorerSHO
Member
- Joined
- November 22, 2009
- Messages
- 19
- Reaction score
- 0
- City, State
- Boston, MA
- Year, Model & Trim Level
- 1995 Limited 52k miles
Took my 1995 explorer to ford who rebuilt my tranny 2 YEARS ago. Now the O/D lights blinking. Hooked up OBD1 meeter and got code 111 10 111. Those are the no codes all clear engine off test. Took it out for a ride and started to blink again. Pulled over and did not turn off the engine and did an engine on test and found no codes with the O/D light still blinking.
Took it back out and put it into 4X4 high and with-in a few min it disappeared. Ran for 30 minutes and no blinking light. Put it back into 2x4 mode and with-in a few min it came right back on.
Ran the ENGINE ON test and found no fault codes.
Please help im at my wits end
Took it back out and put it into 4X4 high and with-in a few min it disappeared. Ran for 30 minutes and no blinking light. Put it back into 2x4 mode and with-in a few min it came right back on.
Ran the ENGINE ON test and found no fault codes.
Please help im at my wits end