Removing Stock Fog Light from Bumper

[bsu4phd]

Hello all,

The glass for my D-side stock fog light mounted in the bumber was shattered. I 'd like to take out the light to see if I can replace the glass or need to buy a whole light assembly. Preferably only the glass at a junk yard...

My question is, how do you remove the light??? I got the one screw into the bumber plastic (liner) out, and one of the two screws in the bumper. The other one is hard to reach except with a tiny ratchet wrench and tiny hands... Had anyone done this before???

In advance, thank you very much for your help!

Marc

 

[aldive]

Its very easy to remove the housing.

You just remove the 4 bolts ( 2 in the drawing and in the photograph ) and disconnect the electrical connector ( 1 in the drawing ).

I don't think the glass is a separate part. You will need to purchase the entire housing.

The passenger side is as follows:

XL2Z15200AA $87.65 $0.00 $73.63 Electrical - Chassis electrical - Fog lamps - Fog lamp assy
FOG LAMP ASSY, Explorer, w/o Limited Edition, Right 1999 - 2000

This is from Torrie at Ford Parts Network ( http://www.fordpartsnetwork.com/ )