ZBlackBeast
Well-Known Member
- Joined
- November 8, 2007
- Messages
- 461
- Reaction score
- 2
- City, State
- Plymouth, CT
- Year, Model & Trim Level
- 1995 Ford Explorer/SHO
Mkar.. So, picked up a 2000 Ranger 5 speed 3.0, and the a/c doesnt work.. Much like my SHO, we jumper the low AND hi pressure switch to get the compressor to kick on to try and add r-134a.. well no dice.. After playing with a volt meter for a while we decided that there must be a drain in the series from the high pressure switch to the low pressure switch. (red with yellow stripe wire).. Any insight? Also, when we jumped the high pressure side the motor revved up like it was expecting the compressor to kick on.. We measured the power going to the compressor when we jumped it and it had less than 1v..