spindle lift with 33's

[cmmb1987]

im getting a 3inch spindle lift in the front and a 4inch leaf pack in the back and because of a little sag in the back, i will end up with and over all 3inch lift, whats the biggest i could run, 32x11.50?, 33x12.5? and if only the 32's will work, does ne1 know of ne 32x12.5 by chance?

thanx

 

[Alec]

Dead Link Removed

 

[cmmb1987]

thats an awesome chart yet it has nothing about a 3inch suspension for my years, but oh well lol guess ill have to go up another inch

 

[karl_burns]

here's some more info

I've got the torsion bars all the way up (about 1.5-1.75 inches taller than stock) and run 31's with no problem. You should be able to run 32s with no problem, and I think 33s with no problem.
Acutally, jefe runs 35s with a spindle kit on the front, but he might have trimmed the inner fender walls a bit.
Keep us posted on what you do.
Karl

 

[Jefe]

Re: here's some more info

Originally posted by karl_burns
Acutally, jefe runs 35s with a spindle kit on the front, but he might have trimmed the inner fender walls a bit.

Um. . 4x4's can'd do spindle lifts. I did have 35's with only 4" of lift (3" BL + TT)
Dead Link Removed

(and I actually ran 35's without the BL and a 3" TT [2wd] for a few months onroad)

 

[karl_burns]

Ooops

Jeffseal has the spindle lift and 35s. Not Jefe.
My bad. All you Jef_____ names are confusing me!

Karl