Spring sale! 20 Explorers for parts!!!

[inh]

I need the pieces that go through the rear hatch glass that the support struts mount to. Theyre held in with a torx bit. How much for the whole setup (both pieces that are inside and outside the glass?)

I also need a passenger side power mirror, no puddle lamps, non heated.

All this is for my 2000 XLS

 

[RangRayy]

thanks again for the head light and turn signals yest. i will def be back out soon for the bumpers!!

 

[ped5stang]

I need the pieces that go through the rear hatch glass that the support struts mount to. Theyre held in with a torx bit. How much for the whole setup (both pieces that are inside and outside the glass?)

I also need a passenger side power mirror, no puddle lamps, non heated.

All this is for my 2000 XLS

I have the rear hatch glass hardware kit for $35 and the RH door mirror for $25.

 

[ghosttrain2]

I received the washer resevoir friday, but it does not have the low fluid sensor or the provision for it. Do you have one?

 

[ped5stang]

I received the washer resevoir friday, but it does not have the low fluid sensor or the provision for it. Do you have one?

I know that I have another one available. Do you have the part number off of your old one? Email your shipping information again and I will get one pulled and shipped out.

 

[ghosttrain2]

Will do-after work.

 

[ghosttrain2]

could not find a parts label or number, so I photographed it. The one I need is on the right, the low fluid sensor for the message center mounts in the highlighted hole. http://i370.photobucket.com/albums/oo150/ghosttrain2/000_0001.jpg

 

[ghosttrain2]

*bump*

 

[briwayjones]

Have any full length non-message center gray consoles from a late year 2nd gen Explorer?

 

[ped5stang]

Have any full length non-message center gray consoles from a late year 2nd gen Explorer?

I do have a full length gray center console for $125.

 

[mechanix]

How about a Neutral position sensor from a 91 Explorer?

 

[ped5stang]

How about a Neutral position sensor from a 91 Explorer?

I do not have one available.

 

[tmsoko]

Looking for a few 2004 Mountaineer parts - let me know:

- Black trim panel attached to bottom of lift glass - cracked top to bottom through the Mercury logo (big suprise)
- Drivers leather / power seat from Premier with grey interior. Full seat or just leather trim. My side vinyl panels have cracked.

Todd
tmsoko@comcast.net

 

[ThePhoenix]

how about the connector to the airbox from the MAS tube? thinking about making my own CIA by bolting this to current piece in reverse. Then I will have a tube to put cone air cleaner on

let me know how much please
chaz

 

[ped5stang]

Looking for a few 2004 Mountaineer parts - let me know:

- Black trim panel attached to bottom of lift glass - cracked top to bottom through the Mercury logo (big suprise)
- Drivers leather / power seat from Premier with grey interior. Full seat or just leather trim. My side vinyl panels have cracked.

Todd
tmsoko@comcast.net

I do not have any 04 Mountaineer parts.

 

[ped5stang]

how about the connector to the airbox from the MAS tube? thinking about making my own CIA by bolting this to current piece in reverse. Then I will have a tube to put cone air cleaner on

let me know how much please
chaz

Stock air meter tube for $24, shipping included.

 

[dnvm]

Part Wanted

Hello, I own a 2000 Mercury Mountaineer 5.0 that I am looking to create a custom manifold. So I need the lower half for modifying. Do you by any chance know if a non GT40 lower will bolt to stock GT40 heads with all of the ports matching? If it will work then I would prefer the non GT40 versus destroying a GT40 lower. If you are unsure about the non GT40 do you have a GT40 lower that is damaged were the upper and lower meet?
I hope I made sense.
Thank You.

 

[ped5stang]

Hello, I own a 2000 Mercury Mountaineer 5.0 that I am looking to create a custom manifold. So I need the lower half for modifying. Do you by any chance know if a non GT40 lower will bolt to stock GT40 heads with all of the ports matching? If it will work then I would prefer the non GT40 versus destroying a GT40 lower. If you are unsure about the non GT40 do you have a GT40 lower that is damaged were the upper and lower meet?
I hope I made sense.
Thank You.

I have a stock Mustang GT HO lower intake available for $39, shipping included. Or, I have a stock GT40 lower intake available for $149, shipping included.

 

[jenren81]

hey there..

any chance you have gas and t case skid plates for an 03 sport... or an older ex if it mounts up???

thanks!

 

[CJExplorer]

How much for a 1995 cruise control ON/OFF switch?