Joe Explorer
New Member
- Joined
- July 3, 2008
- Messages
- 3
- Reaction score
- 0
- City, State
- Omaha, Ne
- Year, Model & Trim Level
- 92 XLT
Hi, Some years back I had an alpine installed in my 1992 XLT explorer. That system went out. I went to put back in the stock stereo and they clipped off the whole plug. They only reattached some of the wires. I went to the junkyard clipped off a plug and reattached all the wires. Lights, radio buttons and everything works except the sound? On the back of the stereo there is an additional empty plug slot but I don't see another set of wires that would go in there? I'm thinking the amp wire is cut some where but I cannot tell where? Any other ideas or suggestions? Thanks