T-Case motor ?'s

[Pheonixx77]

Ok so i took off the balancer, no big deal. I got the cover off the motor, but that was a dead end. I have searched and searched and got diagrams from Ford (worthless). how do i get the motor off the T-case? i see three holes that look as though there is some sort of screw or torx screw in them but they are real deep and i cant spend 3 hours figuring out what scredriver or torx bit i need cause i cant see in there. looking around the site i saw a pic of a T-case with the motor removed and where these "holes" i see are what look like threads on the T-case.
HELP!!!! i cant get the motor off.



:roll:

 

[410Fortune]

Yikes, there are 3 simple bolts that hold the motor to the T case, 10mm head.
The torx bits are part of the motor case assembly, you dont need to touch them until after the motor is off the T case, and then only if you are rebuilding the motor.

 

[Pheonixx77]

Ok i got that so far but i am referring to these holes pictured below. Seems kinda small for a 10mm bolt...

 

[tcndeb]

those are the ones that need to come off. (and the end bracket of course).