the big three

[anti*commander]

i have searched but havnt found anyone who has any pictures of the big three. i just want to see where they attached the cable for the engine, and to the chassis. i bought some 0 gauge wire and need to buy some connectors for the ends of the cables. thanks.

 

[Troma]

All you have to do is alternator ground, alternator to battery, battery ground. You don't even have to remove the factory wiring, as the current flow will follow the path of least resistance. If you're looking for the terminals to connect with then purchase a Haynes manual, although they should not be hard to find.

Just reread your posted question, but just follow the factory wiring locations.