MyExplorer03v8Lim
Well-Known Member
- Joined
- June 20, 2016
- Messages
- 261
- Reaction score
- 14
- Year, Model & Trim Level
- 2003 Explorer 4.6L
so there are 4 bolts that go in vertically. Two left and two right. All four snapped off. The four horizontal bolts are intact.
I'm going to try drilling them out but I need a little info.
Are they threaded into the frame rails, or is there a nut up there? Does anyone have the spec for these bolts, or a part number so I can see what's going on up there? Its so rusted I can't tell what going on with them. Thanks!
If the frame rails are threaded I'll try to preserve the threads. If it's a nut it'll change my plan of attack and I'll probably start getting fancy with magnets and wire.
I'm going to try drilling them out but I need a little info.
Are they threaded into the frame rails, or is there a nut up there? Does anyone have the spec for these bolts, or a part number so I can see what's going on up there? Its so rusted I can't tell what going on with them. Thanks!
If the frame rails are threaded I'll try to preserve the threads. If it's a nut it'll change my plan of attack and I'll probably start getting fancy with magnets and wire.