Tire Question?

[Trav2o14]

I know theres a chart and everything , but I was just wondering if anyone has ever run 35x12.50's on a 10 inch wide rim on a 95 to 00 sport with a 2in torsion bar crank and a 3in bodylift(like anybody personally or seen it)?? The info would be much help , thanx alot.

 

[Lifted95X]

Im sure it is possible, if you want to break out the sawzall.

 

[Alec]

With only 3" of lift you'd need very wide backspacing, over 4" off your front bumper and fenders, you'd need to hammer the firewall back and maybe cut it and weld in a patch, and cut out your rear fenders too.

In other words, if you want the truck to still have decent body work you need at the very least 5" of lift and even then lots of cutting or fiber fenders.

 

[Alec]

Oops, missed the TT part. Though like I said, 5" of lift with 35s is still pretty difficult.

 

[Trav2o14]

Well I would be puting wheel adaptors on it so im sure that spaces it out alot further , I have American Racing Bajas, I'm not sure the backspacing on them , but if the wheel adaptors do anything to help tell me but otherwise thanx for the info, I guess I mite have to use 33's, thanx