MikesXploder
New Member
- Joined
- October 14, 2007
- Messages
- 5
- Reaction score
- 0
- City, State
- bucyrus ohio
- Year, Model & Trim Level
- 1994 xlt
Hi all. I've got a 1995 4wd that developed an oil leak from one of the servo covers. I pulled the transmission out last year to replace the o-rings and then figured it would be easiest to pull the engine out, fix a few problems with it and reinstall them both as a unit. Now the engine and trans are back in and I'm working on reinstalling the accessories and such. I look on the shelf and find a steel line that I think goes on the transmission. It is about 1/4 inch O.D. and 48 inches long. It has a few bends in it and has a piece of rubber hose 4 inches long on one end. Sound familiar to any one?
I should have marked it when I pulled the trans out, but I didn't think it would be a year later before I was putting everything back together. Is there a source for any pictures of the trans and associated lines and such? I have a Haynes manual and a Ford Technical Manual on CD but neither of them have any pictures of the trans. Thanks in advance for any help. I will be back with more question
I should have marked it when I pulled the trans out, but I didn't think it would be a year later before I was putting everything back together. Is there a source for any pictures of the trans and associated lines and such? I have a Haynes manual and a Ford Technical Manual on CD but neither of them have any pictures of the trans. Thanks in advance for any help. I will be back with more question
