vibration when braking

[Redrider93]

I had a bad vibration when braking so I bought all the parts needed to do the job. Two new rotors and pads and new seals , plus grease and towels. When I pulled the tires off I found both rotors was cracked . I changed every thing out and it took about 4 hours to do the complete job . I would like to Thank Glacier991 for his write up . I studied that post several times before I did the work . Again Thanks. And thanks to this great site , Thanks Dale in SC

 

[GrillCosby]

How long ago was that and do you have pictures documenting the process? I am always afraid to do repairs on my own but just in case money is tight I would like to learn how to go the DIY way. Any light you could shed would be fantastic! Thanks in advance!

 

[cogs]

grill, no problems, just tell us your questions, and if you're repacking the bearings or not.

and how were those rotors cracked?

 

[Redrider93]

I got all my info from the sticky
http://www.explorerforum.com/forums/showthread.php?t=232754
just read it several times. I took pictures but can't figure out how to load them.