Wanderer's Caged FW SAS

[wanderer351]

welp..the new engine crosmember is hangin in the paintbooth at work drying..:

what else to build today...hmmm......

 

['97 V8]

build me a tranny X member

 

[JoshC]

welp..the new engine crosmember is hangin in the paintbooth at work drying..:

what else to build today...hmmm......

:ttiwwp:

 

[wanderer351]

build me a tranny X member

sure...send me the measurements..and some ideas of how you want it done...$75 and shipping...

heres yer pix dang...

OH...

TODAYS UPDATE...

got the locker in the front..and I decided I wanted to use the EB coils I've got..so I cut the buckets off..and gotta make an adjustable plate so I can get the ride height just where I want it...

engine crossmember is made and in..gonna modify the rear axle cover..and put a drain and fill plug in it..

(yea I know..its all dusty...I'll wash it sometime this week..or at least spray it off..)

oh..and heres the BLING diff cover...(I thought it was a can of grey spraypaint..turned out getto chrome..)

 

[Shooter_68]

So does it transform?

 

[wanderer351]

So does it transform?

robot in desguise...

 

[wanderer351]

mocked up some adjustable coil buckets the other day..built them this week.....and got the passenger side spring bucket in today...its perfect...8+in of down adjustment..everything lines up perfect!!

oh..and I decided to makem artsy/dangerouse...the tires will NEVER get close enough to get caught on them..so its all good..

now to hack the driverside bucket off...I might have to modify the otherone because of a bumpout in the frame...but its really close..so I might just fudge it and leave it..

 

[IZwack]

AHah those edges are FANCY! I guess spark plug changes are going to require a pair of these:

 

[lifeguard379]

those look sweet!

 

[wanderer351]

AHah those edges are FANCY! I guess spark plug changes are going to require a pair of these:

I've already got a set of those in my bondage gear...JUST KIDDING...

the plugs are still accessable just fine over the top..but it should keep people from stickin their hands in there...(not that I've ever had someone attempt to molest my coil springs...but ya cant be too careful...)

 

[IZwack]

I've already got a set of those in my bondage gear...

you too? we should get together sometime. ahah!

 

[Mud Bug 94]

you too? we should get together sometime. ahah!

HOLD ON TO YOUR HATS GENTALMEN!!!!!!

 

[james t]

Those coil towers have more edges than Willem Dafoe. Sweet.

 

[wanderer351]

well...I've got a seepin brakeline...and need to mount tabs to secure the brakelines at the shocks...and to add friction modifyer to the rear axle...and fix the one middle pillar on the exo cage...buy the tierod ends and get the steering in..


BUT...I got it out..and flex tested it....unbeleivable..I need a bigger rock in the yard...when Im flexin the rear..the driver front it totaly compressed...but the pass side is about 1in from max..

when Im flexing the front the rear has about 2in before the pass side is at full compression..and the driver side is about 2in from max droop..

 

['97 V8]

Sweet!! Can't wait to see it in person hopefully this summer. I'll take you up on the offer too.

 

[Mud Bug 94]

howd you put that drain plug in? my 10.25 could use one.....any closer pics?

 

[wanderer351]

howd you put that drain plug in? my 10.25 could use one.....any closer pics?

its just a fill plug...(I always pull the cover when I do changes to check for pieces of metal and get the housing clean for new fluid)...I just welded a nut on the inside of the cover in an area that had clearance for it..then drilled through the center and put a bolt in it..(can trimmed the bolt so it didnt go further in than the nut)..it actually took me LONGER to find a decent sized bolt and nut in my bolt bins than it did to weld it and drill it..

I still have to finnish fillin it (ran out of fluid)...I'll get some pix when I top it off...

 

[Mud Bug 94]

did the f-350 master bolt up or did you have to mod anything? pics?...detailed.

 

[wanderer351]

did the f-350 master bolt up or did you have to mod anything? pics?...detailed.

it just bolted right upp...I had to change the fittings from stock explorer to match the f350...I MIGHT need to lenghten the pushrod a litte (just unscrew it)...but it seems to work fine..

 

[DB_1]

Looks like it's comin' together

Is that F-350 master any shorter than the stock Explorer master? I really need the extra room even if it's only an inch or so shorter because my shock mount is to close for comfort