want to do two inch lift

[john93rangerstx]

i want to do a two inch lift on my 93 ranger i was going to put the f 150 spacer in and i look at the thread on my ranger there is none left ther rusted off how hard is it to change that and if i just do coils do i still have to take that nut off to but new ones on

 

[little x]

In order to change the stud you'll need to remove the spindles.
You need to take off the nut to swap springs also.
As someone who has had both spacers and springs at one time on my truck I highly recommend spending the extra bit of $ for 2" springs.

 

[john93rangerstx]

thanks

 

[davidhicks16]

In order to change the stud you'll need to remove the spindles.
You need to take off the nut to swap springs also.
As someone who has had both spacers and springs at one time on my truck I highly recommend spending the extra bit of $ for 2" springs.

I will have to agree i put skyjacker 132's in my 94ex last week, I'd say its probably the best upgrade I've done so far

 

[loomisexploder]

about how much are decent lift springs? and u dont need to touch anything else if they are only 2" lift springs correct?