WAR153 vs. Copperhead

[bgh1441]

Which shackles do you prefer?
Or any others?
Just did the aal and the lift coil, and the back end still needs another 1" to 1 1/4". Looking for it on the cheap.
Which ever one is best where is the cheapest place to find them.

 

[99ex22]

Warrior Shackles. desertrat.com. I actually bought mine through a local 4 wheel drive shop for 60.00 and went and picked them up from the Warrior Products warehouse.

 

[robmurt04]

copperhead will give you a solid 2" of lift, take a little work to get them in (had to use a hammer and vice to open up one end more :thumbdwn, and you'll need new bolts or to drill out the shackles to use the stock ones. I drilled mine out and went though about 10 drill bits before I could get them all drilled out. These SOB's are STRONG.

warrior shackles around 1.5", I believe just bolts right up with no problem.

For you're situation I'd use the WAR153 Shackles since you don't need too much more lift. I needed as much lift as possible that's why I went with copperhead.

 

[91exploreron37]

copperhead will give you a solid 2" of lift, take a little work to get them in (had to use a hammer and vice to open up one end more :thumbdwn, and you'll need new bolts or to drill out the shackles to use the stock ones. I drilled mine out and went though about 10 drill bits before I could get them all drilled out. These SOB's are STRONG.

warrior shackles around 1.5", I believe just bolts right up with no problem.

For you're situation I'd use the WAR153 Shackles since you don't need too much more lift. I needed as much lift as possible that's why I went with copperhead.

Do you have any pics of those shackles? I remember hearing about them a LONG time ago.

 

[robmurt04]

http://copperheadfab.com/index.php?action=productview&productid=165

I can get pictures of them installed if you want me to...

 

[section525]

Warrior. I had never seen/heard of the Copperhead ones until now. But after seeing a picture of them... Warrior! :

 

[IZwack]

Wait, wasnt there a Section525 shackle at some point with blinged out dimpled holes? I think JTSmith has a pair ...

 

[91exploreron37]

http://copperheadfab.com/index.php?action=productview&productid=165

I can get pictures of them installed if you want me to...

Yea I want to see how they look installed.

 

[Turdle]

Wait, wasnt there a Section525 shackle at some point with blinged out dimpled holes? I think JTSmith has a pair ...

they's sexy--

 

[Four0Sport]

you mean sections shackles arent being mass produced yet? what are you busy with over ther? besides everything..