Will18 X10 front and 18 X10.5rear Fit?

Was Browsing and thought these look pretty sweet,

http://cgi.ebay.com/ebaymotors/AFS-...9QQihZ013QQcategoryZ66484QQrdZ1QQcmdZViewItem


Ive seen 18s off a 94-04 on an Explorer just dont know if these wide ones will? any ideas heres the specs

For the front are two 18" x 9", +26mm offset (6.11 backspacing) wheels. For the rear are two HUGE 18" x 10.5" wheels. The back wheels are +27mm offset with 6.9 backspacing. They are 5-lug (5 on 4 ½).

 

[justin146]

Was Browsing and thought these look pretty sweet,

http://cgi.ebay.com/ebaymotors/AFS-...9QQihZ013QQcategoryZ66484QQrdZ1QQcmdZViewItem


Ive seen 18s off a 94-04 on an Explorer just dont know if these wide ones will? any ideas heres the specs

For the front are two 18" x 9", +26mm offset (6.11 backspacing) wheels. For the rear are two HUGE 18" x 10.5" wheels. The back wheels are +27mm offset with 6.9 backspacing. They are 5-lug (5 on 4 ½).

Those backspacing measurements are a little off I believe. The front wheels with a +26mm offset will be ~5.5". The rears will be ~6.3" and will be a little too much. They will rub in the rear without spacers.

 

[RubySlow]

Those backspacing measurements are a little off I believe. The front wheels with a +26mm offset will be ~5.5". The rears will be ~6.3" and will be a little too much. They will rub in the rear without spacers.

You think a 1/2 " spacer might work out back?
or should I just go with 18x9s all round

 

[JohnnyO]

Depends a little bit on tire size and width, but generally speaking a wheel with more than 4.5" backspace is going to rub on the inside, front or rear.