Wiper LEDs

[Sky1785]

What is the best deal on Wiper Lights, the ones on your fluid squirter things?
And do they come with good installation instructions, if not whats the best way to install them?

 

[Hartman]

You can pick them up at Autozone or Pepboys for like $10. You just take the old ones out and put the new ones in I guess, I really don't know for sure because I don't particularly like them. The hardest part will probably be the wiring.

BTW these will only work if you have the squirters in the hood, if they're in the cowl you can't put them on.

 

[Sky1785]

k, thanks... if anyone knows anything the packaging wont tell me about wiring these little things (im a novice to wiring) I'd appreciate it

 

[red96camaro]

I don't know but I'd assume you have a relay, and on, off switch. Ground wire and power wire. Should be simple.

 

[01ExpSport]

I sell them. There are only two wires that you need to connect. All you need to do is replace take out the old washers, and install the new ones. There's a red (or white wire) and a black one. Connect the red to anode wire of corner light and black wire to ground wire. Thats it. Its actually a real simple job.

 

[Josh S.]

I got some for my 93 and soon found out that they wouldn't work cuz the squirters are in the cowl. Anyways, I mounted them on the middle rail of my grill and ir turned out pretty cool. The corner light was too hard to get to, so I just wired it into the headlight wire. Think it was green or something.

 

[Sky1785]

Yea, I have a 91 Navajo and my squirters are back in the cowl so I took them back but i like that grill idea, and i found a way to get to them, but I'm gonna have to get my girlfriend to get to them because the space is too small for my hands.

 

[Cowboys97x]

i put some blue ones on my explorer. I just did a bunch of measureing and drilled two holes in the hood. I get compliments all the time. They really look good. I wired mine to a switch not the parking lights.

 

[Sky1785]

Im glad you said something about that switch. Can you PM or email, or just reply on how you wired them.

 

[Cowboys97x]

for the switch I ran the lights from the hot to my switch the from the switch to the battery. The ground I ran straight to the neg side of the battery. I run all my wires to the battery because I don't won't to tap into wires. thats basically it.

 

[akcrogers]

The tab on the bottom of one of my washers broke, so it wouldn't clip into its hole anymore. I bought the ones with blue lights off ebay and put them in the stock place. If you felt like taking your fenders and vent panel off they would be easy to install. I'm going to do that this summer, but I temporarily super glued them in, it holds it well enough for now.